I. Building
Tips:
Find
the Reference Line on Any Glass Fuselage
Find
MAC & CG Graphically
Cutting
Foam Cores: Power Supply
Cutting
a Hatch in a Fuselage
Measuring
Spoons
Measure
Engine Thrust Lines
Shock-Mount
the Receiver
Elevator
Differential Guage
A
Monokote Tip: Two Irons
Control
Horn Installation
II. Engines
& Fuel Systems:
Pulling
and Cleaning Valves
Using
a Fuel Dot with YS Engines
Clunk
Line Construction
Throttle
Linkage
Hansen
Roto-Mount
Nose
Ring Installation
Headers
& Pipes:
Pastorello
Header Fix
Lamar's
Pipe Mounting System
McConville
Pipe Mount
Henderson's
Header System
YS-NC
Muffler Problem
YS
Tuning Tee
III. At
the Field
Stuff
Your Van
Setting
Up 60-degree Lines
IV. Other
Tips 'n' Tricks Sites
Dick
Hanson -- http://www.concentric.net/~Dhmodels/
Ed
Hartley -- http://www.rcpattern.nxs.net/
Bob
Pastorello -- http://www.rcaerobats.net/
Don
Ramsey -- http://www.cox-internet.com/donramsey
Many
thanks to Ed Hartley
who first created this page.
New
tips & tricks, corrections,
and suggestions should go
to Marty Moleski.
|